Pedrollo TOP FLOOR Submersible Drainage Pump for Low Level Suction 110v

Description

Pedrollo TOP FLOOR Submersible Drainage Pump for Low Level Suction 110v

INSTALLATION & USE

The Pedrollo TOP FLOOR series is suitable for use with clear water that does not contain abrasive particles.
As a result of their ability to drain water to a level of 2 millimetres above ground level, they are suitable for use in domestic emergencies where a small area must be drained to the lowest possible level.

Common uses include domestic emergencies where a small area needs to be drained to the lowest possible level.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Technopolymer
Suction Filter: Technopolymer
Suction Plate: Stainless Steel AISI 304
Diffuser: Technopolymer
Impeller: Noryl GFN2V
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Outlet: 1’1/4″ BSP Male
Power Supply: 110v
Supplied with Hose Connector with Union (Hose tail):
TOP FLOOR 1 ø 25mm
TOP FLOOR 2 ø 35mm

Cable Length: 10m

PERFORMANCE RANGE

Flow rate up to: 160 l/min (9.6 m³/h)
Head up to: 9m

APPLICATION LIMITS

Immersion Depth: 3m
Maximum liquid temperature: +40 °C (maximum liquid temperature +90 °C for a maximum of 3 minutes of intermittent service)
Passage of suspended solids up to ø 2mm
Suction level down to: 2mm above ground level

The TOP FLOOR series are suitable for use with clear water that does not contain abrasive particles.