Marco UP2-P PTFE Gear pump

Description

Marco UP2-P PTFE Gear pump

INSTALLATION & USE

Self-priming electric pump for the transfer of liquids of varied nature. The pumping elements are made up of PTFE gears which can possibly even run dry for brief periods. Main applications: transfer of water and liquid additives for engines.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– transfer of water;
– bilge water discharge;
– transfer of antifreeze, etc.

CONSTRUCTION

Code: 16420212 (12V)
Type: UP2-P
Volt: 12V
Fuse: 5A
Self Priming up to: 1.5m
Weight:1.2kg
Ports: 3/8″ BSP
Hose (mm): 12

PERFORMANCE RANGE

Max Flow Rate: 10 l/min
Max Pressure: 1.5 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 40°C-104°F)
Allowed: Diesel Fuel

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <38°F -100°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max 60°C
Relative Humidity: max. 90°C

Additional information

Performance Data

Downloads

UP2 P Range Datasheet