Pedrollo HF Centrifugal Pump – High Flow

Description

Pedrollo HF Centrifugal Pump – High Flow

INSTALLATION & USE

The Pedrollo HF Centrifugal pumps are suitable for use in civil and agricultural applications. The high efficiency and continuous duty capabilities makes these pumps ideal for use in activities such as flood and spray irrigation, drawing water from lakes, rivers and wells, or for any number of different industrial applications where the characteristics of high flow rates and mid to low head are required.

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

Models:
Single Phase: HFm4 | HFm6C | HFm6B
Three Phase: HF4 | HF6C | HF6B | HF6A | HF8B | HF8A | HF20B* | HF20A*

CONSTRUCTION

Pump Body: Cast Iron, complete with threaded ports in compliance with ISO 228/1
Body Back Plate: Cast Iron (Stainless Steel AISI 304 for HF4)
Impeller: Brass (Cast Iron for HF30)
Motor Shaft: Stainless steel EN 10088-3 – 1.4104
Ports – Inlet & Outlet: 2’1/2″ BSP Female Models HF 4
Ports – Inlet & Outlet: 3″ BSP Female Models HF 6
Ports – Inlet & Outlet: 4″ BSP Female Models HF 8-20-30

PERFORMANCE RANGE

Flow rate up to  2200l/min (132 m³/h)
Head up to 24.5m

APPLICATION LIMITS

– Manometric suction lift up to 7m
– Liquid temperatures between -10°C and +90°C
– Ambient temperature up to +40°C
– Max working pressure:
– 6  bar for HF 4
– 10 bar for HF 6-8-20-30

Options marked with * are constructed with a cast iron impeller

Additional information

Performance Data

Downloads

HF High Flow Datasheet