Pedrollo TOP Submersible Drainage Pumps for Clear Water

Description

Pedrollo TOP Submersible Drainage Pumps for Clear Water

INSTALLATION & USE

The Pedrollo TOP submersible pump series is suitable for use with clear water that does not contain abrasive particles.
Innovative design and advanced technology are incorporated into these new Pedrollo TOP pumps, designed to be easy to use and extremely reliable even when subjected to continuous use (subject to correct installation).

As a result of the design solutions that have been adopted, such as the complete cooling of the motor, and the shaft with double seal, these pumps are perfect for most drainage applications such as draining small flooded areas (rooms, cellars, garages) in the event of an emergency, for the disposal of waste water in the home (from dishwashers, washing machines) and for emptying drainage traps.

The motor is fully cooled and has an ample reserve of power plus a double seal system with barrier chamber of bio-degradable oil. The motor and the pump are easily removed, making maintenance and repair simple. When designing performance levels for TOP pumps, special attention was given to typical requirements for domestic usage.

Performance curves specially designed for high delivery rates at the low installed power rating.

CONSTRUCTION

Pump Body: Technopolymer
Suction Filter: Technopolymer
Suction Plate: Stainless Steel AISI 304
Diffuser: Technopolymer
Impeller: Noryl GFN2V
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104

Port TOP 1-2-3 – Outlet: 1’1/4″ BSP Male
Port TOP 4-5 – Outlet: 1’1/2″ BSP Male

Supplied with Hose Connector with Union (Hosetail):
TOP 1-2 ø 25mm
TOP 3 ø 35mm
TOP 4-5 ø 41mm

Cable Length: 5m

PERFORMANCE RANGE

Flow rate up to  360l/min (21.6 m³/h)
Head up to 15.5m

APPLICATION LIMITS

Immersion Depth: 3m for TOP 1-2-3; 5m for TOP 4-5
Maximum liquid temperature: +40 °C (maximum liquid temperature +90 °C for a maximum of 3 minutes of intermittent service)
Passage of suspended solids up to ø 10mm
Suction level: 14mm above ground level for TOP 1-2-3; 30mm above ground level for TOP 4-5
Continuous Service S1