Marco UPX/AC Electric Gear Pump

Description

Marco UPX/AC 220V Self Priming Electric Gear Pump

INSTALLATION & USE

Self-priming electric gear pump for the transfer of liquids, particularly suitable for the food industry where it is essential that all parts in contact with the liquid are of non-corrosive materials (see exclusions) for discontinuous use.
The pumping elements are made up of PTFE gear drives which can possibly even run dry for brief periods. Completely equipped with in-line filter on the inlet side.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– transfer of fluid alimentary paste
– transfer of beverages
– transfer of milk
– transfer of alimentary oils
– transfer of alimentary fluids

CONSTRUCTION

Code: 1640421C
Type: UPX
Volt: 220V
Fuse: 1.5A
Self Priming: 1.5m
Weight: 4.6kg
Hose: 13mm

PERFORMANCE RANGE

Max Flow Rate:10 l/min
Max Pressure: 6 Bar (87psi)

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water
Allowed: Alimentary Fluids (max. 40°C-104°F)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents
NOT Allowed: Chemical Products which are incompatible with seals.

Additional information

Performance Data

Downloads

UPX/AC Datasheet