Marco UPX-C 12V/24V Chemical Gear Pump

Description

Marco UPX-C 12V/24V Chemical Gear Pump

INSTALLATION & USE

Self-priming electric chemical pumps for transferring of liquids of varied nature including chemical liquids. For discontinuous or intermittent usage. The pumping elements are made up of PTFE gear drives which can possibly even run dry for brief periods. Completely equipped with in-line filter on the inlet side.

Pump body, shaft and connections in stainless steel. Seals and O-rings made of FKM.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– transfer of alkaline or acid fluids in the chemical field.

CONSTRUCTION

Code: 16404112 (12V) Or 16404113 (24V)
Type: UPX/C
Volt: 12 or 24V
Fuse: 10 or 5A
Self Priming: 1.5m
Weight: 1.4kg
Hose: 13mm
Motor power (W): 120
Ports (BSP): 3/8″

PERFORMANCE RANGE

Max Flow Rate: 15 l/min
Max Pressure: 2 Bar (29psi)

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Chemical Liquids (max. 40°C-104°F) compatible with PTFE and FKM

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <131°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents