Pedrollo D Submersible Drainage Pumps 110v

Description

Pedrollo D Submersible Drainage Pumps – 110v

INSTALLATION & USE

Designed for draining clear or slightly dirty water, the Pedrollo D series pumps are recommended for domestic, civil and professional applications for draining flooded interiors such as basements and
garages, for emptying swimming pools and tanks, for disposal of waste water which is not filthy.

These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations.

Please note: Three Phase Pumps do not come with a float switch.

110V Note – Please ensure that your power supply cable is large enough and as short as possible to ensure significant voltage reaches the motor.

CONSTRUCTION

Pump Body: Cast Iron with threaded port in compliance with ISO 228/1
Suction Filter: Stainless Steel AISI 304
Suction Plate: Stainless Steel AISI 304
Impeller: Technopolymer open type (closed for D30)
Motor Casing: Stainless Steel AISI 304
Motor Casing Plate: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Outlet: 1’1/2″ BSP Female
Power cable length: 10 m
– Float switch for single-phase versions

PERFORMANCE RANGE

Flow rate up to  300l/min (18 m³/h)
Head up to 16m

APPLICATION LIMITS

– 5 m maximum immersion depth
(with a sufficiently long power cable)
– Maximum liquid temperature +40 °C
– Passage of suspended solids up to Ø 10 mm
– Suction down to 17 mm above ground level
– Minimum immersion depth for continuous service: 220 mm

Additional information

Performance Data

Downloads

D Range Datasheet