Marco UP10-P 12V/24V Heavy Duty Gear Pumps

Description

Marco UP10-P 12V/24V Heavy Duty Gear Pumps

INSTALLATION & USE

Self-priming electric heavy duty gear pump for the transfer of liquids of varied nature up to 7 bar pressure. The pumping elements are made up of PTFE gears which can possibly even run dry for brief periods. Completely equipped with in-line filter on the inlet side.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:
– transfer of diesel fuel between tanks, refuelling of tractors and earth moving equipment
– transfer of water
– transfer of light weight lube oils, antifreeze, etc.

Main application: high pressure spraying.

CONSTRUCTION

Code: 16440212 (12V) or 16440213 (24V)
Type: UP10-P
Volt: 12V or 24V
Fuse: 25A or 20A
Self Priming up to: 3m
Weight: 3.8kg
Ports: 3/8″ BSP
Hose (mm): 13

PERFORMANCE RANGE

Max Flow Rate: 18 l/min
Max Pressure: 7 Bar

APPLICATION LIMITS

Fluids Allowed / Not Allowed:

Allowed: Fresh Water (max. 85°C-185°F)
Allowed: Diesel Fuel minimum flashpoint (PM): 55°C-131°F

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <131°F
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Temperature: Min -10°C / max +60°C
Relative Humidity: max. 90°C