SPEED Submersible Drainage Pumps

Description

SPEED Submersible Drainage Pumps

INSTALLATION & USE

The SPEED series is suitable for draining clear water without abrasive particles. The construction guarantees simple and safe operation due to the complete cooling of the motor by the pumped water and the double seal design.

They are recommended for emergency draining of small flooded areas (rooms, cellars, garages), for the disposal of waste water in the home (dishwasher, washing machine) and for emptying drainage traps.

CONSTRUCTION
Body: Glass filled technopolymer, particularly resistant to impact and corrosion, with threaded port ISO 228/1.
Impeller: Open type in technopolymer
Motor Support: Stainless steel AISI 304
Motor Shaft: Stainless steel EN 10088-3 – 1.4104
Double Seal: mechanical seal ceramic -graphite – NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Motor: submersible asynchronous single-phase for continuous duty.
SPEED M: Single-phase 220÷240 V – 50 Hz with capacitor and thermal overload protector built into the winding.
Insulation: Class F.
Protection: IP 68
STANDARD FEATURES:
SPEED 30-50-70 M (single-phase)
Float switch.
Hosetail
Power cable in neoprene “H05RN-F” length 5 metres with Schuko plug.
SPEED 100-125 M (single-phase)
Float switch.
Hosetail.
Coupling with flap valve.
Neoprene power cable “H05 RN-F” length 10 metres with Schuko plug
Special mechanical seal

10 metres power cable. N.B. required for outdoor

PERFORMANCE RANGE

Flow rate up to  400l/min (24 m³/h)
Head up to 14.5m

APPLICATION LIMITS

Depth up to 5 metres (3 metres up to 0.55 kW)
Liquid temperature up to + 40°C
(+90°C for a maximum period of 3 minutes)
Passage of solid bodies up to Ø 10 mm
Drainage level:
14 mm from the bottom for SPEED 30-50-70M
30 mm from the bottom for SPEED 100-125M