Marco UP1-N 12V Self-Priming Electric Pump

Description

Marco UP1-N 12V Self-Priming Electric Pump

INSTALLATION & USE

The Macro UP1-N Self-Priming electric pump with rubber impeller. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge and waste water on any type of boat.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– bilge pumps for boats
– transfer of fresh water and sea water

CONSTRUCTION

Code: 16200212
Type: UP1/N
Volt: 12 V
Fuse: 20 A
Weight: 2..9kg
Ports: 1/2″ BSP inner thread and Ø25mm bore hose connections
Self-priming (m): 1.5

PERFORMANCE RANGE

Max Flow Rate: 35 l/min
Max Pressure: 1.2 Bar (17.4psi)

APPLICATION LIMITS

Temperature: Min -10°C / max +60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Allowed: Fresh Water
Allowed: Sea Water
Allowed: Water Containing Glycols

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents
NOT Allowed: Diesel Fuel