Marco OCK1-E Reversible Oil/Diesel Transfer Kit

Description

 Marco OCK1-E Reversible Oil/Diesel Transfer Kit

INSTALLATION & USE

Compact size oil transfer kit. Easy to operate and carry. Reversible: draws and fills oil. Complete with bronze gear pump, clips, fuse, hoses and accessories for transferring operations. Available also with electronic control panel and 12/24V universal voltage.

Self-priming electric pump designed for lubricants and viscous fluids. The pumping elements are made up of bronze gear drives which can possibly even run dry for brief periods. Equipped with a fast connector for oil suction pipe.

There are numerous fields of applications for the pump, however only exclusively with the allowed liquids mentioned:

• Transfer of lubricating oil
• Transfer of viscous liquids
• Transfer of oils, antifreeze
• Circulation of viscous liquids
• Draining of engine sumps

CONSTRUCTION

Code: 16493115 (12V/24V)
Volt: 12/24V
Weight: 2.4kg
Motor Power: 120W
Dimensions 139x108x86 mm
Ports: 3/8″ BSP
Max self priming to 1 meter

PERFORMANCE RANGE

Max Flow Rate: 15 l/min
Max Pressure: 2 Bar (29psi)

APPLICATION LIMITS

Temperature: Min -10°C / max +60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Allowed: Motor Oil (max 120°C°C-248°F) max viscosity 350 cSt
Allowed: Diesel – Minimum flash point (PM): 55°C – 131°F

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <100°F
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents

Additional information

Performance Data

Downloads

OCK1-E Datasheet