Ecosoft Domestic Reverse Osmosis Water Filter with Pump

Description

Ecosoft Domestic Reverse Osmosis Water Filter with Pump

INSTALLATION & USE

Reverse osmosis is the most effective technology for the purification of water for drinking. It reduces 99.8% of impurities, as well as odours, flavours, and viruses making water clear, clean, tasty, and safe for human health, both for adults and children. The reverse osmosis filter is also one of the most cost-effective methods of domestic water purification.

Advantages of the Ecosoft P’URE AquaCalcium reverse osmosis water filter

• Ecosoft membrane element — Ukrainian water treatment market leader
• 5 stages of water purification
• 7.9 L of drinking water per hour
• Up to 7 L storage tank
• Delicious taste of water thanks to included coconut shell carbon filter
• Filter housing made of pure European food grade plastic
• Special vacuum tightness control

Benefits of using the filter

• Source of absolutely clean and safe drinking water
• Dishes cooked with the water will taste better
• Coffee beans and tea leaves will open up their flavors and aroma
• Home appliances (kettle, iron, steam cooker, air humidifier etc.) will be protected from scale
• The clean water can be used to water flowers

Certain users of reverse osmosis filters doubt that so thoroughly purified water can supply human organism with important minerals. But scientists have proved up to 90% of minerals are provided with food, not water.

Stages of water purification

The feed water flows through the three pre-filters intended to reduce sediments (rust, sand, silt etc.), chlorine and chlorination by-products, as well as organic matter.

The fourth stage is represented by the reverse osmosis membrane which at the molecular level purifies the water from 99.8% impurities including bacteria and viruses. The purified water is supplied to the storage tank.

The carbon post-filter is the fifth stage of the water treatment. It contains high-quality activated coconut shell carbon which improves purified water taste and odor, and adds slight sophisticated sweetish flavor.

TECHNICAL DETAILS

Inlet pressure for filter without pump, atm: 3–6*
Inlet pressure for filter with pump, atm: 2–4.5*
Pressure in storage tank, atm: 0.4–0.6**1
Temperature of feed water, °C: +4…+30***
Filter weight (basic configuration), kg: 7
Temperature of environment limit, °C: +5…+40***
Water supply external connection, inches: thread, ½

* If the pressure in the water supply system is lower than indicated, the filter should be supplied with a pump. If the pressure in the water supply system is higher than indicated, it is necessary to install a pressure regulator at the inlet before the reverse osmosis filter.

** If the pressure is lower or higher than indicated, it is necessary to pump up or release the pressure.

*** If the temperature of feed water is within the range +20…+30 °C, selectiveness of the membrane insignificantly decreases, and capacity increases leading to insignificant growth of the TDS indicator. Application of the filter when the temperature of feed water exceeds +30 °C is not recommended.

CONSTRUCTION

Filtration module with domestic pump
Plastic storage tank (general vol. 12 L, effective vol. up to 7 L)
Chrome ball valve faucet ‘Droplet’ for purified water
Included feed water adaptor with feed valve for connection with water mains
Ball valve faucet of storage tank
Set of color tubes (4 pc.) for convenient filter installation
Drain saddle clip for connection of the filter to sewers
Set of replacement pre-filters (1st, 2nd, 3rd stages)
Ecosoft membrane 50 GPD (190 L per day)
Service wrenches for replacement of filters and the membrane