Marco UP3/P 12V Self Priming Water Pump with PTFE Gears

Description

Marco UP3/P 12V Self Priming Water Pump with PTFE Gears

INSTALLATION & USE

Self-priming electric water pump with PTFE gears, complete with in-line filter..
Brass body with stainless steel shaft.
Suitable for fresh or salt water.

For intermittent use only.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– bilge pumps for boats
– transfer of fresh water, sea water and liquid additives for engines.

CONSTRUCTION

Code: 16400212
Type: UP3/P 12V
Volt: 12 V
Fuse: 10 A
Self-priming (m): 1.5
Weight: 1.5kg
Hose (mm): 13
Ports (BSP): 3/8″
Motor power (W): 120

PERFORMANCE RANGE

Max Flow Rate: 15 l/min
Max Pressure: 2 Bar (29psi)

APPLICATION LIMITS

Temperature: Min -10°C / max +60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Diesel Fuel – Minimum Flashpoint (PM): 55°C
Fresh Water
Sea Water

Liquids NOT Allowed:

Not Allowed – Petrol (Gasoline)
Not Allowed – Flammable Liquids with PM <55°C
Not Allowed – Liquids with Viscosity >20 cSt
Not Allowed – Foodstuff Liquids
Not Allowed – Corrosive Chemical Products