Pedrollo JCR2 Stainless Steel Self-Priming “JET” Pumps

Description

Pedrollo JCR2 Stainless Steel Self-Priming “JET” Pumps

INSTALLATION & USE

The Pedrollo JCR Stainless Steel Self Priming pumps are designed to pump water even in cases where air is present. Because of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium sized pressure tanks, and for the irrigation of gardens and orchards, etc.

Common applications include;

Irrigating a garden or pressurising a house from a shallow well
Irrigating a garden or pressurising a house from a stream
Irrigating a garden or pressurising a house from an underground rainwater harvesting tank

We always recommend getting pumps installed by a qualified plumber.
The pump should be installed in an enclosed environment or sheltered from inclement weather.

Models include:
Single Phase: JCRm2A | JCRm2B | JCRm2C
Three Phase: JCR2A | JCR2B | JCR2C

CONSTRUCTION

Pump Body: Stainless Steel AISI 304, complete with threaded ports in compliance with ISO 228/1
Body Back Plate: Stainless Steel AISI 304
Nozzle Assembly: Noryl FE1520PW
Impeller: Stainless Steel AISI 304
Motor Shaft: Stainless Steel EN 10088-3 – 1.4104
Ports – Inlet & Outlet: 1″

PERFORMANCE RANGE

Flow rate up to  70l/min (4.2 m³/h)
Head up to 60m

APPLICATION LIMITS

– Manometric suction lift up to 9m (HS)
– Liquid temperatures between -10°C and +40°C
– Ambient temperature up to +40°C
– Max working pressure: 6  bar
 

Additional information

Performance Data

Downloads

JCR2 Datasheet