Description

The Sabre E3- 3 Bar Water Boosting Bundle

 

INSTALLATION & USE

The Sabre bundle consists of a 3-bar pump supplied with Flow Switch controller which is designed to automate the operation of an electric pump by sensing the water movement in systems that have some flow due to gravity. The opening of a tap/valve will cause a small flow of water that is detected by the unit and the pump is started, closing the tap will stop the water flow and the pump stops.. The Sabre is suitable for a number of house water boosting applications and is specifically designed as a solution to low water pressure and flow. The pump is efficient and extremely quiet in operation.

Ideal for boosting water pressure in medium properties with up to 3 bathrooms.

Single pumps are designed to boost single water supplies; hot, cold or pre-mixed.

Can Provide 30 litres per min at 3 bar.

The Sabre must be used in combination with a break tank or header tank. This will give your pump a reservoir of water to draw from. If you do not have a break or header tank, you may need to consider our All-In-One Solution water booster that comes complete with a water tank.

Unless otherwise specified pumps are not allowed to be connected directly to the public mains.

Pressure delivery may vary dependant on pipework in property

NOT SUITABLE FOR INSTALLING AFTER THE SHOWER VALVE

TECHNICAL INFORMATION

Material: Stainless Steel AISI 304

Voltage: 230V 1Ph 50Hz

Max. Flow: 80 l/min

Max. Head: 38m

Motor Size (kW/W) 0.45Kw

Port: 1”

CONTROLLER FEATURES

– Automates the start and stop operations of the pump by sensing water movement in the system.
– Protects against dry running and water hammering
– Connections: 1” BSP male

Suitable for showers and other hot water applications (max 65°C).
NOT SUITABLE FOR INSTALLING AFTER THE SHOWER VALVE

 

Additional information

Weight	8.8 kg
Dimensions	L 361 x W 182 x H 576 mm

Performance Data

Downloads

Flow Pump Datasheet