Marco UPX-C/AC Chemical Gear Pump

Description

Marco UPX-C/AC 220V Self Priming Pump Gear Pump

INSTALLATION & USE

Self-priming electric pump for the transfer of liquids, particularly suitable for use in the chemical field where it is essential that all parts in contact with the liquid are of non corrosive materials. Resistant to most acid and alkaline solutions (see exclusions) for discontinuous use.
The pumping elements are made up of PTFE gear drives which can possibly even run dry for brief periods. Completely equipped with in-line filter on the inlet side.

There are numerous fields of application for this pump, however only exclusively with the allowed liquids mentioned:
– transfer of fluids in the chemical field
– acid and alkaline solutions
– acid solutions for batteries

CONSTRUCTION

Code: 164 043 1C
Type: UPX-C
Volt: 220V
Fuse: 1.5A
Self Priming: 1.5m
Weight: 4.6kg
Hose: 13mm

PERFORMANCE RANGE

Max Flow Rate:10 l/min
Max Pressure: 6 Bar (87psi)

APPLICATION LIMITS

Temperature: Min -10°C / max +60°C
Relative Humidity: max. 90°C

Fluids Allowed / Not Allowed:

Allowed: Chemical Fluid (max. 40°C-104°F)

NOT Allowed: Petrol (Gasoline)
NOT Allowed: Flammable Liquids with PM <55°C
NOT Allowed: Liquids with Viscosity >20 cSt
NOT Allowed: Foodstuff Liquids
NOT Allowed: Corrosive Chemical Products
NOT Allowed: Solvents
NOT Allowed: Chemical Products which are incompatible with seals

Additional information

Performance Data

Downloads

UPXC/AC Datasheet