Product images are for illustration purposes only.
JS2 Self Priming Pumps
From: £155.00 (excl. VAT)
JS self-priming pumps are designed for suction lifts and can be positioned above the water source, for domestic use, including water distribution.
Flow rate up to 70 l/min (4.2m³/h) Head up to 58m
Next Working Day Delivery (UK Mainland Only)
- Product Data
- Performance Data
- Reviews (0)
JS Self Priming Pumps
INSTALLATION & USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JS self-priming pumps are designed for suction lifts and can be positioned above the water source, including applications with air entrained in the water. Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc. The pumps must be installed in enclosed places, or at least protected against inclement weather.
The pumps must be installed in enclosed places, or at least protected against inclement weather.
Pump Body: Cast Iron with threaded ports ISO 228/1.
Body Back-Plate: Stainless steel AISI 304
Ejector Assembly: Technopolymer (approved for drinking water)
Motor Shaft: Stainless steel EN 10088-3 – 1.4104.
Mechanical Seal: Ceramic – graphite – NBR
Electric Motor: These pumps are close-coupled to a carefully matched electric motor, quiet running, totally enclosed fan cooled, suitable for continuous duty.
JS M: single-phase 230 V – 50 Hz with capacitor and thermal overload protector.
Insulation: class F.
Protection: IP 44.
Flow rate up to 70 l/min (4.2 m³/h)
Head up to 58m
– Manometric suction lift up to 9m
– Liquid temperatures up to +40°C
– Environment temperature up to +40°C
|Dimensions||L 402 x W 180 x H 201 mm|
Only logged in customers who have purchased this product may leave a review.