Description

DAB – JET 82M – SELF-PRIMING CENTRIFUGAL PUMPS

INSTALLATION & USE

The DAB – JET 82M Self priming centrifugal pumps feature excellent suction capacity even in the presence of air bubbles. They are suitable for pumping water with low levels of sandy impurities and are mainly used in domestic water supply installations.

Used especially for supplying water to domestic installations. Ideal for use in small-scale agriculture and gardening, limited industrial services and wherever self-priming operation is necessary.

CONSTRUCTION

Cast iron pump body and motor support.
Motor support in die cast aluminium.
Impeller, diffuser, venturi tube and sand guard in technopolymer
Stainless steel wear ring.
Carbon/ceramic mechanical seal.
Induction motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41).
Motor protection: IP44
Terminal box protection: IP55
Insulation class: F
Standard voltage:
single-phase 220-240 V/50 Hz
Inlet and outlet: 1″

PERFORMANCE RANGE

Flow rate up to  60 l/min (3.6 m³/h)
Head up to 47m

APPLICATION LIMITS

Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral, close to the properties of water.
Liquid temperature range: from 0°C to +35°C for domestic use
(EN 60335-2-41). For other use: from 0°C to +40°C
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)

Additional information

Performance Data

Downloads

DAB JET Datasheet
DAB JET Instructions PT1
DAB JET Instructions PT2